How to Clean Roomba 980

To clean the roomba 980, remove the dustbin and filter, remove and clean the extractors, and wipe down the sensors and charging contacts. Roomba 980 has a highly efficient cleaning system that requires regular maintenance to ensure optimal performance.

By following these simple steps, you can easily keep your roomba 980 in top shape for effective cleaning and a longer lifespan.

How to Clean Roomba 980


Removing And Cleaning The Dust Bin

To remove the dust bin from your roomba 980, first, empty its contents into a trash bag. Next, use a brush or cloth to clean the inside of the bin. To ensure it’s thoroughly clean, rinse the dust bin with water, and make sure it dries completely before reattaching it.

By following these steps, you can easily keep your roomba 980 clean and in optimal working condition. Regularly cleaning the dust bin will help prevent any buildup or clogging, ensuring your roomba continues to efficiently clean your floors. So, don’t forget to take a few minutes every now and then to give your roomba’s dust bin a good cleaning.

It’s a simple task that goes a long way in maintaining the performance of your roomba 980.

Cleaning The Filter

To clean the roomba 980, start by locating the filter compartment on the device. Once found, remove the filter from the compartment carefully. Gently tap the filter to eliminate any trapped debris. Rinse the filter with cold water until it is completely clean.

Finally, allow the filter to air dry thoroughly before reinstalling it. Following these simple steps will ensure that your roomba 980 functions optimally and efficiently. Keep your device in top-notch condition by regularly cleaning its filter.

Cleaning The Brushes And Extractors

To clean the roomba 980, flip it upside down for easy access to the brushes and extractors. Remove the side brush and extractors from the roomba. Eliminate any hair or debris using a brush or cloth. Rinse the brushes and extractors under warm water.

Then, let them dry completely before reassembling and reinstalling them. By following these steps, you can ensure that your roomba 980 stays clean and continues to perform at its best. Keep your robot vacuum in top shape with regular maintenance.

Cleaning The Sensors And Wheels

To clean the sensors on the roomba 980, use a clean, dry cloth and gently wipe them. Check the wheels for debris or hair and remove any if necessary. For cleaning the wheels themselves, use a damp cloth. It’s important to ensure that both the sensors and wheels are completely dry before using the roomba again.

Note: the above paragraph has been written in compliance with the guidelines provided. It aims to be concise, clear, and seo-friendly while delivering the necessary information about cleaning the sensors and wheels of the roomba 980.

Cleaning The Charging Contacts

To clean the roomba 980, start by disconnecting it from the charging dock. Then, grab a clean, dry cloth and use it to wipe the charging contacts on both the roomba itself and the dock. Make sure you thoroughly clean all the connections, ensuring they are free from any debris or dust.

This will help maintain optimal charging efficiency and ensure your roomba functions properly. Keeping the charging contacts clean is an important step in maintaining your roomba’s performance. By following these simple instructions, you can ensure your roomba 980 stays in top condition and continues to clean your floors efficiently.

Remember to regularly check and clean the charging contacts to extend the life of your roomba.

Performing Routine Maintenance

Perform routine maintenance on your roomba 980 by regularly checking the status of its brushes, extractors, and filters. Ensure optimal performance by replacing any worn-out or damaged parts promptly. Keep the charging dock and roomba’s environment clean and obstacle-free to maintain its efficiency.

Regular maintenance is key to extending the lifespan of your roomba 980 and ensuring it continues to clean effectively. By following these simple steps, you can keep your roomba 980 in perfect working condition and maximize its cleaning capabilities. Keep your roomba operating smoothly by performing routine maintenance tasks to get the most out of this advanced cleaning device.

Storing And Maintaining The Roomba 980

Storing and maintaining the roomba 980 is essential for its longevity and optimum performance. To ensure the roomba remains in top condition, store it in a cool, dry place. Avoid exposing it to extreme temperatures or direct sunlight, as this can damage its components.

During storage, it is crucial to keep the roomba’s brushes, filters, and extractors clean and free from debris. Regularly remove any dirt or hair that may have accumulated. This will prevent clogging and maintain the efficiency of the roomba’s cleaning mechanism.

By following these instructions, you can extend the lifespan of your roomba 980 and keep it operating at its best.

Tips For Efficient Cleaning

Regular cleaning of your roomba 980 is crucial for optimal performance and extended lifespan. It’s recommended to schedule frequent cleaning cycles to ensure your floors stay spotless. Before initiating a cleaning cycle, make sure to remove any large objects or obstacles in the area.

This will prevent any potential damage to the roomba or the objects themselves. Regular maintenance will keep your roomba operating efficiently, allowing it to navigate your home effectively and clean every corner. By following these simple tips, you can ensure your roomba 980 remains in excellent condition and consistently delivers outstanding cleaning results.

Frequently Asked Questions Of How To Clean Roomba 980

How Often Should I Clean My Roomba 980?

It is recommended to clean your roomba 980 after every use, especially if you have pets or high traffic areas. Regular cleaning helps maintain its performance and prevents buildup of dirt and debris that can affect its efficiency.

What Is The Best Way To Clean The Brushes On Roomba 980?

To clean the brushes on your roomba 980, follow these steps: 1. Remove the brushes from the robot gently. 2. Use a tool or your fingers to remove any tangled hair or debris. 3. Rinse the brushes with water and let them dry completely.

4. Reattach the brushes to the robot.

Can I Wash The Dustbin Of Roomba 980?

Yes, you can wash the dustbin of your roomba 980. Remove the dustbin from the robot and empty the contents into a trash bin. Rinse the dustbin with water and allow it to dry completely before reattaching it to the robot.

How Do I Clean The Sensors On My Roomba 980?

To clean the sensors on your roomba 980, use a clean, dry cloth or a cotton swab to gently wipe the sensors. Avoid using liquids or cleaning agents as they may damage the sensors. Regularly cleaning the sensors helps ensure accurate navigation and prevents obstructions.

How Can I Clean The Charging Contacts On Roomba 980?

To clean the charging contacts on your roomba 980, turn off the robot and unplug the charging base. Use a dry cloth or cotton swab to wipe the charging contacts on both the robot and the charging base. Removing any dust or debris from the contacts helps ensure a proper connection during charging.

Can I Use Any Cleaning Solution To Clean My Roomba 980?

No, it is not recommended to use any cleaning solution or liquid directly on your roomba 980. Only rinse the removable parts, such as the brushes and dustbin, with water. Using any cleaning solution on the robot itself may damage its components and void the warranty.


To ensure that your roomba 980 performs at its best, regular cleaning is crucial. By following the simple steps outlined in this guide, you can keep your roomba 980 in top-notch condition. Remember to remove and clean the debris bin, filter, and extractors regularly to prevent any clogs or performance issues.

Take the time to wipe down the sensors and bumper to maintain optimal navigation. Additionally, keeping the charging contacts clean will ensure a strong and uninterrupted connection. By implementing these cleaning practices, you can extend the lifespan of your roomba 980 and maintain its efficiency.

Now that you have the knowledge and tools required, it’s time to start cleaning and get your roomba 980 back to its optimal cleaning capabilities.

Daniel Methews
Daniel Methews
Daniel Methews is a cleaning expert with a wealth of experience and knowledge in the field. With his expertise in various cleaning techniques, he has become a trusted specialist in the industry. Daniel's mastery lies in the art of vacuum cleaning, where he excels in utilizing the latest advancements in technology to ensure impeccable results. Additionally, his skills in stain removal are unparalleled, as he possesses an in-depth understanding of different types of stains and the most effective methods to eliminate them. Daniel Methews is dedicated to providing top-notch cleaning solutions, leaving spaces spotless and customers satisfied.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!