How to remove roller brush from shark rocket vacuum

The question is, do you know how to remove the roller brush from the shark vacuum cleaner in case of any problem? It does not matter the type of vacuum you have; the process may be similar for most cleaners.

Therefore, the step-to-step guideline on removing the roller brush from the shark rotator vacuum will help you clean all types of vacuum cleaners

Removing the roller brush from the shark vacuum cleaner

How to remove roller brush from shark rocket vacuum
How to remove roller brush from shark rocket vacuum

For every homeowner and housekeeper, there is a dream to clean a house faster at a minimum cost. Homeowners will always look for everything in the market that will speed up the house chores, which involves buying a shark rocket vacuum cleaner.

Besides, the vacuum cleaner is the essential tool in your home and it has parts that demands close attention; a roller bush.

This part is either made of metal, plastic, or wood and is prone to debris, which requires you to clean it frequently. Although the modern cleaners are self-cleaning, some will require you to detach them for cleaning.

Read More: Shark Vacuum Overheating? Know-How To Solve It!

Why Do You Have to Remove the Roller Brush?

remove roller brush from shark rocket vacuum

How to remove roller brush from shark rocket vacuum? After using your vacuum cleaner for a long time, you will realize that the machine is not cleaning up the floor as it did before. 😢

This is because, over time, the brush collects debris and dust, which reduces its performance. When a lot of dirt gets attached to the brush bristles, the brush cannot effectively wipe out the dust from the floor.

It is, therefore, time to check for the problem and clean the machine. Frequently cleaning and replacement of the roller brush also improves the working of the shark vacuum cleaner.

Furthermore, you may have used the machine for a long time, which implies that the roller brush is getting old. The performance of the vacuum lowers as the roller brush gets abraded.

At this point, you need to remove the old brush and replace a new roller brush for your shark rocket vacuum.

Therefore, if you need to remove your roller brush, whether it is old or has attracted a lot of dirt, here is an effective procedure that will help repair your vacuum cleaner quickly.

You do not always need to involve the experts since the process is straightforward and does not require many tools.

Watch the video

1. Unplug the Shark Vacuum from the Power Source

Should you be reminded of this step? Of course, it is the most critical part of your safety. As simple as it sounds, you should prioritize your safety and those around you before handling any electric appliance.

Many people prefer only switching off power when repairing their vacuum cleaner as much as this hack will work for you, but think about when someone will switch it on unknowingly.

Additionally, moving the vacuum cleaner or its roller brush while still plugged to the power source may ultimately damage the cleaner.

Therefore, before carrying out any cleaning process on your electric appliances, ensure it is detached from the power to avoid electric shock. 

2. Locate the Roller Brush

Different vacuum models come with varying locations of the brush. For instance, if you ask how to remove the roller brush from the shark navigator vacuum, you must first think where the roller brush is located.

You have to take time to know the position of the roller brush.

However, most shark vacuum cleaners have their roller brushes situated right at the underside of the vacuum. To access it, lay the machine down to expose the screws holding the roller brush.

In most cases, the screws are corroded and hidden after prolonged use. But you can scrape off the rust using a rust remover.

3. Removing the Screws

Do you have a toolbox? Or, when buying the shark vacuum cleaner, did it come with its specific screwdrivers?

Every shark vacuum cleaner comes with its right head screwdrivers to easily remove the screws during a repair. If you do not have your tool package, you can buy one from the electric shop near you that will help you;

However, it is recommended to the right screwdriver to avoid damaging the screws or enlarging the screw holes.

Additionally, to avoid losing the screws, you will need to have a collecting box to store them.

4. Detach the Roller Brush from the Shark Vacuum

In most cases, Shark vacuum cleaners have a plastic cover or front panel that covers the scroll bar below. After removing all screws, carefully remove the front panel to expose the rotating brush below.

Once you have removed all the screws holding the roller brush in the position, you can now move the last step. But not too fast. First, you need to check the status of the roller brush.

In most Shark vacuum cleaners, one side of the roller brush can easily slide out of the chamber, but the other end has to be removed carefully from the belt.

The process of

How to remove roller brush from shark powered lift-away vacuum

How to remove roller brush from shark powered lift-away vacuum
How to remove roller brush from shark powered lift-away vacuum

And shark duo clean will always differ at the last step, depending on the position of the roller brush.

Sometimes, it can be hard to pop out the machine’s roller brush because it can be together with other components.

However, it most cases, one end of the brush slides out with ease while the other end needs to be pulled out of the holding belt. If it does not freely detach for the component, you can rotate it in a counter-clockwise direction until it pops out. Be gentle enough not to damage the holding belt.

After removing the roller brush and cleaning it, you need to fix it back to its position. You may even want to replace it with a new one depending on how long you have used it.

Therefore, for shark rocket brush roll replacement, you need to follow the manufacturer’s manual attached to the machine.

However, it is easier to fix back the roller brush if you follow the above steps correctly and note the brush’s initial positioning.

Shark Rocket Disassembly

Shark Rocket Disassembly
Shark Rocket Disassembly

A vacuum cleaner is a very hard-working machine, and the user is supposed to do everything it takes to maintain it. The maintenance measures include replacing the vital parts such as the roller brush and the horse.

The shark rocket brush roll replacement is a critical process that needs close attention to avoid damaging the machine.

Therefore., here is a guideline on how you can disassemble the brush roll from the vacuum to clean and replace it;

  • Unplug the shark rocket vacuum from the primary power source and turn it so that the bottom base is visible. Gently detach the two wheels off the void with a plastic opening tool.
  • Unscrew the five screws using a recommended Philip 2 screwdriver.
  • Locate and remove the three plastic screws to reveal the brush’s position using a quarter or flathead screwdriver. Remove the plate covering the roller brush.
  • Using a Philips 2 screwdriver, extract the three screws holding the brush in position.
  • Flip back the shark rocket vacuum so that the roller brush is on the floor. Grab the vacuum from both sides of the horse and pull it up to remove the vacuum’s outer part halfway.
  • Gently pinch the cable’s head and pull the outer casing of the vacuum until it is completely detached from the vacuum.
  • Using a Philips 2 screwdriver, unscrew the four visible screws holding the rotary brush to the vacuum.
  • Can you locate the rotary belt on the right side of the vacuum? Gently remove the belt from the bearing and lift the casing to disconnect the belt and the roller brush from the shark rocket vacuum cleaner.
  • Once you have the rotary brush freely detached from the components, carefully remove the plastic casing on both sides of the brush. Lift the transparent plastic shell covering the roller brush.
  • Check the rotary belt attached to the brush and replace it if it’s worn out.
  • For shark rocket brush roll replacement, follow the procedure in reverse order.

How to Remove Roller Brush from Shark Rotator Vacuum

Once your rotator vacuum fails to clean your house as before, it means it is time to check if there is a problem with its roller brush. Here is a quick guide on how you can fix the issues yourself;

  • Pull the handle while pressing the lift away button to detach the body of the vacuum.
  • Turn the base of the vacuum over to expose its bottom.
  •  Remove the two wheels using a metal too.
  •  Unscrew the nine 16mm screws using a Philips 2 screwdriver and press on the side tabs in the panel’s middle. Pull off to reveal the screw located under the hose connection. Unscrew the 13.5mm using a Philips 2 screwdriver.
  • Pull and move the cover to the side. Disconnect the wire attached to the base of the vacuum by squeezing and pulling the pin.
  • Unscrew the two 11mm screws securing the roller brush cover and lift it.
  • Pull out the roller brush for the components.
  • To replace and fix the roller brush, follow the process in reverse order.

In short: Remove the roller brush from a Shark Rocket

  1. Turn off the vacuum and unplug it from the power outlet.
  2. Locate the roller brush on the bottom of the vacuum cleaner. It is the cylindrical brush that rotates to agitate the carpet and loosen dirt and debris.
  3. Look for the belt that connects the roller brush to the vacuum’s motor. The belt is typically located at the center of the roller brush, and it may be covered by a belt guard or other protective cover.
  4. Using a flat-head screwdriver or a similar tool, gently pry the belt guard or protective cover away from the roller brush.
  5. Once the belt guard or cover is removed, you should be able to see the belt that connects the roller brush to the motor. Using the screwdriver, carefully pry the belt away from the roller brush.
  6. Once the belt has been removed, you should be able to gently lift the roller brush out of its mounting on the bottom of the vacuum cleaner.
  7. To re-install the roller brush, follow these steps in reverse order. Make sure the belt is properly seated on the roller brush and the motor, and that the belt guard or protective cover is securely in place.

Conclusion

Although the removal process may be different for various shark vacuum cleaner models, it is wise to note that most models undergo similar procedures when replacing the roller brush.

Whether it is a shark duo cleaner or a professional vacuum, the final step will always help you access the roller brush.

However, during replacement, you are advised to follow the manufacturer’s manual that comes with the package.

Additionally, it is wise to use the right tools and follow all the precautions during a repair. Do you want to try it? Go ahead and enjoy a cost-free repair.  

It is important to handle the roller brush and the belt with care to avoid damaging them. If you are unsure about how to remove the roller brush or re-install it, it is best to consult the user manual for your Shark Rocket vacuum cleaner or contact the manufacturer for assistance.

Daniel Methews
Daniel Methewshttps://cleaningspy.com
Daniel Methews is a cleaning expert with a wealth of experience and knowledge in the field. With his expertise in various cleaning techniques, he has become a trusted specialist in the industry. Daniel's mastery lies in the art of vacuum cleaning, where he excels in utilizing the latest advancements in technology to ensure impeccable results. Additionally, his skills in stain removal are unparalleled, as he possesses an in-depth understanding of different types of stains and the most effective methods to eliminate them. Daniel Methews is dedicated to providing top-notch cleaning solutions, leaving spaces spotless and customers satisfied.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!