How to Deep Clean Your Roomba 690: Ultimate Maintenance Guide

To clean roomba 690, remove and clean the debris bin, clean the filter, wipe down the sensors, and remove hair from the brushes. Introducing, cleaning your roomba 690 is essential for maintaining its performance and prolonging its lifespan.

By following a few simple steps, you can keep your roomba running smoothly and efficiently. In this guide, we will walk you through the process of cleaning your roomba 690. Whether it’s removing debris from the bin or cleaning the filters, we’ve got you covered.

So, let’s dive right in and get your roomba 690 sparkling clean in no time!

How to Deep Clean Your Roomba 690: Ultimate Maintenance Guide


Why Regular Cleaning And Maintenance Are Essential

Regular cleaning and maintenance are essential to keep your roomba 690 in top condition and enhance its cleaning efficiency and lifespan. By following these simple steps, you can prevent dirt buildup and clogging. Firstly, make sure to regularly empty the dustbin and clean the filter to optimize the robot’s suction power.

Secondly, remove any hair or debris that may get tangled in the brush roll. Thirdly, wipe the sensors and charging contacts with a soft cloth to ensure proper functionality. Fourthly, check the wheels for any obstructions or debris and clean them if necessary.

Fifthly, inspect the side brushes and replace them if they show signs of wear and tear. Lastly, don’t forget to clean the charging dock and ensure it is free from any blockages. By adhering to these maintenance practices, your roomba 690 will continue to deliver exceptional cleaning results.

Tools And Supplies Needed

To clean the roomba 690, you will need a soft bristle brush, rubbing alcohol, a microfiber cloth, compressed air can, a screwdriver set, and replacement filters if necessary. Begin by using the soft bristle brush to remove any visible dirt or debris from the robot’s surface.

Next, dampen the microfiber cloth with rubbing alcohol and wipe down the exterior of the roomba, making sure to clean all areas thoroughly. For tight spaces and crevices, use compressed air to blow out any trapped dust or particles. If needed, refer to the roomba’s user manual and use a screwdriver set to remove and clean the brushes and filters.

After cleaning, reassemble the robot and ensure everything is securely in place. Following these simple steps will keep your roomba 690 in top-notch condition.

Step-By-Step Guide To Deep Clean Your Roomba 690

Deep cleaning your roomba 690 is essential for maintaining its performance. Start by removing the dustbin and filters. Clean both thoroughly to keep your roomba working efficiently. Next, clear debris from the extractors to prevent clogs and jams. Don’t forget to clean the side wheels and front wheel caster, as these areas can accumulate dirt and grime over time.

Take the time to remove any hair and dirt from the brushroll, as this can impact your roomba’s cleaning effectiveness. Additionally, clean the sensors and charging contacts to ensure proper functionality. Finally, familiarize yourself with troubleshooting tips to address common issues.

By following these steps, you’ll keep your roomba 690 in top shape and enjoy clean floors for longer periods.

Tips For Routine Maintenance

Regularly empty the dustbin and clean filters to keep your roomba 690 performing at its best. Clear debris from the extractors and ensure the side wheels and front caster are free from any buildup. Take a few moments to check the brushroll for hair and dirt, making sure it can rotate smoothly.

Wipe the sensors and charging contacts with a soft cloth to maintain proper functionality. Following these steps can help prolong the lifespan of your roomba and ensure it effectively cleans your floors. Keep up with routine maintenance to enjoy a consistently clean home without any extra hassle.

Extended Maintenance Schedule

To maintain your roomba 690 in optimal condition, perform the following monthly tasks. Begin by thoroughly cleaning the dustbin, filters, and brushes in order to remove any accumulated dirt and debris. If applicable, apply lubrication to the moving parts to ensure smooth operation.

Take the time to inspect and clean the wheel axles and suspension for any signs of dirt or obstruction. Performing these routine maintenance tasks on a monthly basis will help prolong the life of your roomba and improve its overall performance.

Keep your roomba running efficiently with regular care and maintenance.

Frequently Asked Questions (Faqs)

The roomba 690 is easy to clean and maintain. Yes, you can use water to clean the dustbin and filters, ensuring they are completely dry before reassembling. It is recommended to clean the extractors once a week to keep them in optimal condition.

However, the sensors should not be cleaned with rubbing alcohol as it can damage them. Instead, use a soft cloth or cotton swab to clean the sensors. For disassembling the roomba 690, it is best to use the recommended screwdriver that comes with the product to avoid any damage.

Follow these tips to keep your roomba 690 clean and performing at its best.

Frequently Asked Questions Of How To Clean Roomba 690

How Do I Clean The Brushes On Roomba 690?

To clean the brushes on your roomba 690, first remove the dustbin. Then, using the provided cleaning tool, remove any debris tangled in the brushes. Use a scissor or your fingers to cut or pull off any hair or fibers.

Finally, reattach the dustbin and your roomba is ready to go.

How Often Should I Clean The Filter Of Roomba 690?

It is recommended to clean the filter of your roomba 690 at least once a week to maintain optimal performance. Remove the filter from the dustbin and tap it gently to remove the dirt and dust. Rinse it under running water, let it dry completely, and then place it back into the dustbin.

What Is The Best Way To Clean The Sensors On Roomba 690?

To ensure proper functionality, regularly clean the sensors on your roomba 690. Use a clean, dry cloth to wipe the sensors located on the front bumper. Gently remove any dust or debris that may be obstructing the sensors, ensuring they are free from any obstacles for accurate navigation.

Can I Use Water To Clean The Roomba 690?

No, it is not recommended to use water or any liquid to clean the roomba 690. Instead, utilize a clean, dry cloth or the provided cleaning tool to remove any dirt, debris, or hair from the robot. Water may damage the electronic components and potentially void the warranty, so it is best to avoid using it.

What Should I Do If My Roomba 690 Stops Working After Cleaning?

If your roomba 690 stops working after cleaning, ensure that all the parts are properly reassembled. Check for any loose connections or obstructions. If the issue persists, try resetting the robot by holding down the “clean” button for 20 seconds.

Contact customer support if the problem still persists.


Taking care of your roomba 690 is essential to ensure its optimal performance and longevity. By following the simple steps outlined in this guide, you can easily keep your roomba clean and in top shape. Start by cleaning the brushes and filters regularly to prevent any debris buildup that may affect its suction power.

Remember to empty the dustbin after each cleaning session to avoid any clogging issues. Additionally, don’t forget to clean the sensors and charging contacts to maintain proper navigation and charging capabilities. Regular maintenance also includes checking for any blockages in the wheels and replacing worn-out parts when necessary.

By following these maintenance practices, you can extend the life of your roomba 690 and enjoy hassle-free cleaning for years to come. Keep your roomba clean, and it will keep your floors clean!

Daniel Methews
Daniel Methews
Daniel Methews is a cleaning expert with a wealth of experience and knowledge in the field. With his expertise in various cleaning techniques, he has become a trusted specialist in the industry. Daniel's mastery lies in the art of vacuum cleaning, where he excels in utilizing the latest advancements in technology to ensure impeccable results. Additionally, his skills in stain removal are unparalleled, as he possesses an in-depth understanding of different types of stains and the most effective methods to eliminate them. Daniel Methews is dedicated to providing top-notch cleaning solutions, leaving spaces spotless and customers satisfied.

More from author

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!